Skip to main content
site map
contact
our twitterour facebook page linkdin instagram
prev
next
AM Davis Blog
Thursday, November 09 2023
When is Refresher Training Required

Forklift operators are typically required to undergo refresher training at specific intervals to ensure they continue to operate forklifts safely and effectively. The specific requirements for refresher training can vary by country, region, and organization, but some common guidelines and triggers for refresher training include:

  1. Time Intervals: Forklift operators are required to undergo refresher training  every three years. This helps ensure that their skills and knowledge remain up to date.

  2. Changes in Equipment or Workplace: If there are significant changes in the type of forklift being used or in the layout of the workplace, refresher training may be necessary to familiarize operators with these changes.

  3. Incidents or Near-Misses: After accidents, near-miss incidents, or safety violations related to forklift operation, refresher training may be mandated to address the issues and prevent future incidents.

  4. Poor Performance: If an operator demonstrates poor performance or unsafe behavior while operating a forklift, additional training may be required to address these issues.

  5. Regulatory Requirements: Local regulations and safety standards can dictate the specific requirements for forklift operator training and refresher training. Employers should ensure compliance with these regulations.

  6. Employer Policies: Employers may establish their own policies and guidelines for forklift operator refresher training. These policies should align with safety best practices and local regulations.

It's essential for employers to maintain records of forklift operator training and refresher training, as well as to have a clear training and retraining program in place. The goal is to ensure that forklift operators remain competent and safe in their duties. The specific requirements and intervals for refresher training may vary, so it's important to consult local regulations and industry standards to determine the appropriate schedule for your organization. AM Davis is your reliable source for forklift operator training in the Richmond Virginia metro area. Contact us for scheduling or give us a call at 804-233-0051.

Posted by: BarryL AT 02:54 pm   |  Permalink   |  Email
Monday, August 07 2023
Getting the Most Our of Your Forklift Tires

Taking good care of your forklift tires is essential to ensure the safe and efficient operation of the forklift, as well as to extend the lifespan of the tires. Here are some tips to help you maintain your forklift tires:

  1. Regular Inspections: Inspect your forklift tires on a regular basis, preferably before each shift. Look for signs of wear, damage, punctures, and uneven tread wear. Catching problems early can help prevent larger issues down the line.

  2. Proper Inflation: If you utilize pneumatic tires on your forklifts, maintain proper tire pressure according to the manufacturer's recommendations. Underinflated or overinflated tires can lead to uneven wear and reduced performance. Use a reliable tire pressure gauge to check and adjust the pressure as needed.

  3. Load Capacity: Ensure that you're not exceeding the forklift's load capacity. Overloading the forklift can cause excessive strain on the tires, leading to premature wear and potential safety hazards.

  4. Appropriate Speed: Avoid driving the forklift at excessive speeds, especially when carrying a load. High speeds can generate heat and cause increased tire wear. Stick to recommended speed limits to minimize tire stress.

  5. Keep Surfaces Clean: Keeping operating surfaces clean and free of debris can greatly reduce forklift tire damage.

  6. Safe Driving Practices: Encourage operators to avoid sudden starts, stops, and turns, which can put extra stress on the tires. Gradual acceleration and deceleration are easier on the tires and contribute to their longevity.

  7. Avoid Potholes and Obstacles: Try to avoid driving over potholes, sharp objects, or debris on the floor. These can cause punctures and damage to the tires.

  8. Proper Loading: When lifting and placing loads, ensure that the load is balanced and properly positioned on the forks. An unbalanced load can cause uneven tire wear and potential accidents.

  9. Professional Maintenance: Our Planned Maintenance program ensures all vital components, including tires, are in good operating order. We can check for alignment issues, suspension problems, and other factors that could affect tire wear.

  10. Tire Replacement: When tires are excessively worn, damaged, or have reached the end of their useful life, replace them promptly to maintain safety and performance.

Remember, taking care of your forklift tires not only improves the efficiency and lifespan of your equipment but also contributes to overall workplace safety. Always follow the manufacturer's guidelines and consult with professionals if you're unsure about tire maintenance or replacement.

Posted by: BarryL AT 10:34 am   |  Permalink   |  Email
Wednesday, July 12 2023
Tips to Improve Loading Dock Safety

12 Tips that will help improve safety on your warehouse loading docks.

Posted by: BarryL AT 04:42 pm   |  Permalink   |  Email
Wednesday, May 10 2023
Forklift Safety Day 2024

Forklift Safety Day will celebrate its 10th Anniversary of recognizing the importance of forklift safety on June 13th, 2023.

Posted by: BarryL AT 01:47 pm   |  Permalink   |  Email
Thursday, May 04 2023
Benefits of UniCarriers MX Series Electric Forklifts

UniCarriers MX Series electric forklifts provide the benefits of electric forklifts while maintaining the same productivity as their internal combustion forklift counterparts. The MX Series indoor/outdoor electric forklifts are equipped with powerful 48 Volt and 80 Volt (for higher capacity models) motors, and are sealed to make them perfect for indoor or outdoor usage.  Like all UniCarriers forklifts, the MX Series are covered by their best-in-class 2 year unlimited warranty.

UniCarriers MX electric forklifts offer several benefits, including:

  1. Reduced Emissions: Electric forklifts produce zero emissions during operation, making them ideal for indoor use and in areas with strict emission regulations.
  2. Lower Operating Costs: Electric forklifts have lower operating costs than their diesel or propane counterparts. They require less maintenance and have lower fuel costs.
  3. Improved Productivity: Electric forklifts have faster acceleration and lifting speeds, which can help increase productivity.
  4. Quieter Operation: Electric forklifts are much quieter than their diesel or propane counterparts, making them ideal for indoor use.
  5. Increased Safety: Electric forklifts have a lower center of gravity, making them more stable during operation. They also have fewer moving parts, reducing the risk of mechanical failure.
  6. Longer Lifespan: Electric forklifts have fewer moving parts than their internal combustion engine counterparts, reducing the need for costly repairs and extending their lifespan.
  7. Customizable: UniCarriers MX electric forklifts are highly customizable, with a range of options and attachments available to suit specific applications and industries.

UniCarriers MX electric forklifts provide a cost-effective and environmentally friendly solution for material handling needs. Learn more about the MXS Series Lighter Duty Outdoor Electrics, the MX2 Medium Duty Electrics, and the MXL High-Capacity Electrics with capacities to 12,000lbs.

We're Richmond metro's source for UniCarriers forklifts. For a demo, more information or a quote on a new MX Series outdoor electric forklift please contact us at 804-233-0051.

Posted by: Barry L AT 08:51 am   |  Permalink   |  Email