Skip to main content
site map
contact
our twitterour facebook page linkdin instagram
prev
next
AM Davis Blog
Thursday, July 10 2025
Tips for Maintaining Your Forklift's Tires

Maintaining forklift tires properly can extend their life, improve safety, and enhance operator comfort. Here are some practical tips for keeping your forklift tires in good condition:

Perform Regular Inspections

  • Check for wear and damage: Look for cracks, chunking, flat spots, or excessive wear. Make tire inspections part of your normal forklift pre-shift inspection, as required by OSHA. Download our Forklift Inspection Forms HERE.

  • Inspect tread depth: On pneumatic tires, ensure there’s enough tread for traction and cushioning.

  • Look for signs of separation or embedded debris.

Maintain Proper Tire Pressure (Pneumatic Tires)

  • Check inflation daily: Under- or over-inflated tires can cause uneven wear and reduce stability.

  • Use manufacturer-recommended pressure settings.

Rotate Tires

  • Even out wear patterns by rotating tires regularly (especially on multi-wheel forklifts).

Avoid Overloading

  • Stick to the forklift’s rated capacity. Excess weight increases tire wear and risk of failure.

Drive Smart

  • Avoid sharp turns, quick starts/stops, and high speeds.

  • Reduce impact with curbs, potholes, or dock edges to prevent tire damage.

Maintain Clean Work Areas

  • Debris, sharp objects, and uneven surfaces can puncture or wear tires prematurely.

  • Sweep aisles regularly and repair uneven flooring.

Replace Worn Tires Promptly

  • Cushion tires: Replace when wear line is reached or when the tire diameter is 2 inches less than original.

  • Pneumatic tires: Replace when tread is worn down or casing is damaged.

Use the Right Tire for the Application

  • Cushion vs. pneumatic: Make sure your forklift has the correct tire type for your environment (indoor vs. outdoor).

  • Consider solid pneumatics for heavy-duty or debris-laden areas to avoid flats.

Selecting the proper tires for your forklift and maintaining them is key to creating a safe working environment for your employees, and keeping your costs down by getting the most out of each set of tires you purchase. For more information about forklift tire replacement visit our Forklift Tire Replacement page, or contact us at 804-233-0051 for information and pricing. We replace tires for ALL MAKES and MODELS.

Posted by: BarryL AT 07:56 am   |  Permalink   |  Email
Thursday, June 19 2025
Keeping Your Employees Cool in Your Warehouse

As summer temperatures rise, so do the risks for heat-related illnesses—especially for workers in the material handling and warehouse industries, where physical exertion and limited airflow are part of the daily routine. Whether employees are loading trucks outdoors, managing logistics in open-air yards, or working in non-climate-controlled warehouses, staying cool isn’t just a matter of comfort—it’s a matter of safety. Employers have a responsibility to protect their teams from heat stress and related hazards. This article offers practical, proven tips to help keep your workforce safe, cool, and productive throughout the hottest months of the year.

1. Hydration Strategies

  • Water stations: Place multiple shaded water stations with coolers or dispensers filled with ice water.

  • Electrolyte options: Offer sports drinks or electrolyte powders to replenish salts lost through sweat.

  • Hydration reminders: Use signs, mobile app reminders, or supervisors to prompt workers to drink water every 15–20 minutes.

2. Shade & Rest Breaks

  • Pop-up tents or canopies: Provide shaded areas at regular intervals.

  • Portable misting tents or fans: Use cooling fans or misting systems in rest areas.

  • Mandatory cool-down breaks: Schedule 5–10 minute breaks in the shade every hour, more frequently if temps are above 90°F.

3. Clothing & Gear

  • Lightweight, breathable fabrics: Encourage moisture-wicking clothing in light colors.

  • Cooling gear:

    • Cooling vests (ice-pack or evaporative)

    • Neck wraps or towels soaked in cold water

    • Wide-brimmed hats or brim extensions on helmets for sun protection

  • UV-protective gear to prevent sunburn and overheating.

4. Work Schedule Adjustments

  • Start earlier or split shifts: Begin work at sunrise and pause during peak heat hours (typically 12–4 p.m.).

  • Rotate tasks: Alternate between physically intense and less demanding tasks.

  • Use buddy systems to monitor for signs of heat illness.

5. Cooling Equipment

  • Battery-operated fans: Personal wearable fans for hard-to-reach sites.

  • Portable misting fans: For job trailers or staging areas.

  • Ice chest/coolers: Keep cold towels or drinks handy.

6. Training & Awareness

  • Heat illness prevention training:

    • Teach symptoms of heat exhaustion and heat stroke.

    • Emphasize the importance of acclimatization.

  • Post safety signs in common areas with visual cues for heat illness symptoms and first aid steps.

7. Technology Solutions

  • Wearable sensors: Monitor core body temp or heart rate (ideal for high-risk environments).

  • Weather alert apps: Notify crews when heat advisories are issued.

8. Environmental Enhancements

  • Temporary shade structures near worksites.

  • Pavement wetting (for road crews) to reduce ambient surface temperature.

  • Tree planting (long-term) or use of artificial vertical shade barriers where possible.

Pro Tips

  • Use OSHA’s Heat Safety Tool app for personalized alerts and recommendations.

  • Gradually acclimate new or returning workers to heat over 1–2 weeks.

  • Create a heat emergency response plan, including access to cold packs, cooling areas, and emergency contact protocols.

Posted by: BarryL AT 10:20 am   |  Permalink   |  Email
Thursday, May 29 2025
Forklift Safety Day 2025, What You Can Do

The Industrial Truck Association (ITA) will soon be celebrating increasing awareness to the importance of forklift safety. Forklift Safety Day is a great opportunity to review your forklift safety program and/or plan. And if you don’t have a program or plan, this would be a great opportunity to create one! Here's a link to the events taking place in Washington on June 10 and 11.

Start with Training

  • Are all of your forklift operators up-to-date on their training. Remember, forklift operators must receive refresher training every three years, and be evaluated on the equipment that they operate. 
  • How well do you know your operators? Download our Forklift Operator Questionnaire to get to know their experience operating lift equipment.
  • Learn more about Operator Training and our classes at our Training Page.

Inspections and Maintenance

Forklift Safety is No Accident

We’re here to help you maintain safety in your forklift operations by ensuring all your employees that might operate a forklift, know the limitations and dangers of forklifts AND to ensure they are all operating a peak efficiency and safety. To speak to one of our professional about any aspects of your forklift fleet’s safety or performance, just give us a call at 804-233-0051.

Posted by: BarryL AT 08:04 am   |  Permalink   |  Email